Technogroovy RespirableDust Sampler are used for routine monitoring of PM10 in the surroundingair. The model has been made easier to use by providing an overnight operationlighting system, tool box inside the tool, soft handle and lockable top cover.The cabinet design is optimized to prevent rain and dust from entering themachine. With this device, sensitive particles can be measured correctly andTSPM can also be evaluated from the set of dust placed in a cyclone cup.
Working Principle OfRespirable Dust Sampler:
This samplingdevice uses an improved cyclone with a more severe cut to separate the rough flow from the air streambefore filtering it onto a microfiber glass filter. Community maintenance andinconvenience efforts. The brush sample blower also reduces the audible noise.
Respirable Dust Sampler Features:
⢠Brushless blower reduces equipmentdowntime and maintenance effort.
⢠Significantly reduced Noise
⢠Electromagnetic Interference (EMI)to TVs totally eliminated.
⢠Provision of light for flow and timereading during night
⢠Toolbox within the instrument
⢠Lockable casters for fieldconvenience.
⢠Lockable Top cover and Gaseousattachment
⢠Improved cabinet design which ismore sturdy and durable with SS hardware
Technical Specification Of TechnogroovyRespirable Dust Sampler :
⢠Flow Rate : 0.9 â 1.4 m3 /min free flow
⢠Particle Size : Particles of 10microns & below collected on Filter Paper holder. SPM bigger than 10microns collected in a separate sampling bottle under the cyclone
⢠Sampling Time : 28hours (maximum)
⢠Sampling Time Record : 0to 9999.99 hrs recorded on a Time Totalizer
⢠Automatic Sampling : 24 hrs programmable timer to automaticallyshut off the system after pre set time interval.
⢠Stabilizer ; Voltage stabilizer to compensate voltagefluctuations
⢠Power Requirement : Nominal 220 V (+/- 10), Single Phase, 50Hz AC mains supply
⢠Size & Weight : 430 x 320 x 930 mm, 45Kg